6762  Snap-in version from front side Line Switch 1 or 2 pole
Snap-in version
from front side
Line Switch 1 or 2 pole
6762  Screw-on mounting from front side Line switch 2-pole
Screw-on mounting
from front side
Line switch 2-pole
6762  Snap-in version from front side Line Switch 1 or 2 pole
6762  Screw-on mounting from front side Line switch 2-pole

Series: 6762

IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole and Fuseholder 1-pole

Free Sample Request

24 Variants


Connectors (Inlets/Outlets)

C14
Connector Logo
70° C
C18
Connector Logo
70° C

Description

  • Panel mount: Snap-in or screw-on mounting, front side
  • Snap-in version with 1- or 2-pole line switch available
  • Screw-on version only with 2-pole line switch
  • Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.
  • Solder / Quick Connect

Characteristics

  • Line switch non-illuminated or illuminated

Ratings IEC

Ratings IEC


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 60 Hz

Dielectric Strength

Dielectric Strength


Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 1.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

IP-Protection


The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

IP-Protection


The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

Suitable for appliances with protection class I or II acc. to IEC 61140

Terminal

Terminals


Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Solder / Quick Connect

Panel Thickness S

Panel Thickness S


See details in drawing
Snapper

Screw
Mounting screw torque max 0.5 Nm
Snap-in1.0 - 2.0 mm

Material: Housing

PA6, black, UL 94V-0

Appliance inlet/-outlet

Appliance inlet/-outlet


Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C14 / C18 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II

Fuseholder

Fuseholder



1.) fuse holder does not include circuit breakers
2.) Details about fuse-links can be found in the catalog under
FusesDetailed information on the fuse holder and fuse drawers can be found in the general product information.
Fuse drawer

1-pole, acc. to IEC 60127-6,
for fuse-links 5 x 20 mm

Power Acceptance @ Ta > 23°C

Admissible power acceptance at higher ambient temperature see derating curves

Line Switch

Line Switch


Also includes circuit breaker switch and switch for Bowden cables.

Details about the switches can also be found in the general product information.
Line Switch

Rocker switch 1-/2-pole, non-illuminated or illuminated black, acc. to
Technical Details

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.


Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.


Approval Reference Type: 6762

Approval Logo Certificates Certification Body Description
Approval marks ENEC_14 SEMKO Certificate Number: SE/09137-5
Approval marks cURus UL UR File Number: E93617


Product standards

Product standards that are referenced

Organization Design Standard Description
Approval marks IEC_Certification_Body Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Approval marks IEC_Certification_Body Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Approval marks UL Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles
Approval marks CSA_Certification_Body Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices


Application standards

Application standards where the product can be used

Organization Design Standard Description
Approval marks IEC_Certification_Body Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements
Approval marks IEC_Certification_Body Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.


Compliances

The product complies with following Guide Lines

Identification Details Initiator Description
Approval marks CE SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
Approval marks Zulassung_Symbol_UKCA SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
Environment_Safety RoHS_Logo_color_CMYK_tif SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
Environment_Safety China_RoHS_50_non_konform_eps SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
Environment_Safety REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
Environment_Safety Glow_Wire_Proof SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.

020050160000001210
LOADING...

Dimensions [mm]

Screw-on mounting

Snap-in mounting


Derating Curves

Fuses
5 x 20 mm (1-pole)
Admissible power acceptance in Watt
Ambient air temperature Ta °C



6762 - H - A B C N - D - E G O
The characters are placeholders for the correspondingly keys of selections from the key tables.

6762 - H - A B C N - D - E G O = Type
Type Configuration key
protection class I X
protection class II B


6762 - H - A B C N - D - E G O = Terminals
Terminal L Configuration key
solder terminal Configuration key Logo 1
long solder terminal (L = 8.5 mm) Configuration key Logo 3
Blade terminal (4.8 x 0.8 mm) Configuration key Logo 8
Blade terminal (6.3 x 0.8 mm) Configuration key Logo 9


6762 - H - A B C N - D - E G O = Terminals
Terminal N Configuration key
solder terminal 1
long solder terminal (L = 8.5 mm) 3
Blade terminal (4.8 x 0.8 mm) 8
Blade terminal (6.3 x 0.8 mm) 9
Symbols similar as in table A


6762 - H - A B C N - D - E G O = Terminals
Terminal Ground Configuration key
without terminal 0
solder terminal 1
long solder terminal (L = 8.5 mm) 3
Blade terminal (4.8 x 0.8 mm) 8
Blade terminal (6.3 x 0.8 mm) 9
Symbols similar as in table A


6762 - H - A B C N - D - E G O = Terminal Fuseholder
Terminal Fuseholder Configuration key
solder terminal 1
Blade terminal (4.8 x 0.8 mm) 8


6762 - H - A B C N - D - E G O = Color
Color Configuration key
Black A


6762 - H - A B C N - D - E G O = Style
Style Configuration key
flange with countersunk holes 1
flange with through holes 2
snap-in standard type 3
insert type 5


6762 - H - A B C N - D - E G O = Dimension S
Dimension "S" Configuration key
00
The dimension "S" is displayed in (1/10 mm). This information is also valid for the order code


6762 - H - A B C N - D - E G O = Features
Features Configuration key
dead cover 1
holder for 1 fuse (text legible, when inlet on top) 2
holder for 1 fuse (text legible, when inlet on bottom) 3


Short Table of Variants 6762 Open complete table 6762

Type Terminal L Terminal N Order Number
Free Sample

Free Sample


Please ask for free sample in order to check if the products meets your requirement for your application.
Send your delivery adress and your specific requirements.

Distributor Stock Check

Distributor Stock Check


The following links refers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner.
The stock availability at the distributors may also be called up separately and the desired product manually entered.
Stock Check Distributor

...
 
protection class II Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6049 ...
protection class II Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6050 ...
protection class II Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6051 ...
protection class I solder terminal solder terminal 4304.6052 ...
protection class I solder terminal solder terminal 4304.6053 ...
protection class I solder terminal solder terminal 4304.6054 ...
protection class I solder terminal solder terminal 4304.6055 ...
protection class I long solder terminal (L = 8.5 mm) long solder terminal (L = 8.5 mm) 4304.6056 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6057 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6058 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6059 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6060 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6061 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6062 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6063 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6064 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6065 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6066 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6068 ...
protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) 4304.6069 ...
protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) 4304.6070 ...
protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) 4304.6071 ...
protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) 4304.6072 ...
protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) 4304.6120 ...
The listed variants should be available from stock.
Other versions on request
www.schurter.com/contact

Packaging unit 50 Pcs 

020050160000001210
LOADING...
Mating Outlets/Connectors (14)

[Swipe to the left and right for more options]

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

6007.0204

Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black

6007.0212

Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black

6007.0214

Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black

6004.0215

Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black

6003.0215

Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black

6000.0224

Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black

6000.0214

Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black

6044.0215

Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black

6044.0204

Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black

Mating Outlets/Connectors shuttered (1)

[Swipe to the left and right for more options]

VAC17KS

VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white

Accessories (2)

[Swipe to the left and right for more options]

Wire Harness

Wire harness for SCHURTER products

RC320

Rear Cover for Power Entry Module


25.09.2024
   
fr prod En changeant la version du catalogue (Desktop <> Mobile), les filtres sélectionnés dans le catalogue sont réinitialisés.