Series: FPAC RAIL

1-stage filter for 3-phase systems

16 Variants

Approvals and Compliances

CAD

Microsite EMC-Service

Description

Line filter as standard version
1 stage
Filter with standard or high attenuation (HP)

Unique Selling Proposition

Slim housing
Metal base plate for optimum ground connection to the rail
Filter variants with standard and high attenuation
Simple snap-on mounting

Applications

Voltage rating 520 VAC for world wide acceptance
For 3-phase industrial applications in the control cabinet
Machine control systems, switching power supplies, inverters
Suitable for use in equipment according to IEC/UL 62368-1

Detailed request for product

Details FPAC RAIL

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Electrical Data

Rated Current

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

3 - 32 A

Rated voltage

Rated Current

300/520 VAC, 50/60 Hz

Approval for

Approvals indicate the conformity of the products with the national testing institution requirements by listing of the relevant approval logos.
The link leads you to the search mask where you can query for certificates of the selected products.
Approvals
Detailed information about Approvals will be documented in the general product informations.
Details about Approvals

3 - 32 A @ 40 °C / 300/520 VAC; 50/60 Hz

Overload Current

1.5 x Ir for 1 minute, per hour

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 2.25 kVDC between L-L
2.25 kVDC between L-PE

Test voltage 2 sec

Number of Filter Stages

Filter Stages

Quality of a filter

1-stage

Weight

0.4 kg

Material: Housing

Plastics

Mounting

DIN Rail

Terminal

Screw clamps

Operating Temperature

-40 °C to 100 °C

Climatic Category

Disposition of components in categories for the assessment of mechanical and electrical properties.
Climatic Category

40/100/21 acc. to IEC 60068-1

Degree of Protection

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

IP20 acc. to IEC 60529

Protection Class

Class I: with ground; Class II: without ground

Detailed information relating to protection class can also be found in the general product information
Protection against electric shock

Suitable for appliances with protection class I acc. to IEC 61140

MTBF

The term MTBF is the English acronym Mean Time Between Failure and describes reliability of a component. The operating time of a system can be calculated based on thementioned value of the component. - The higher this value, the more reliable the component.
MTBF

> 200'000 h acc. to MIL-HB-217 F

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: FMAD CP

Approval Logo	Certificates	Certification Body	Description
	DEMKO Approvals	DEMKO	Certificate Number: ENEC-04869
	UL Approvals	UL	UR File Number: E495089

Product standards

Product standards that are referenced

Organization	Design	Standard	Description
	Designed according to	IEC 60939	Passive filters for suppressing electromagnetic interference
	Designed according to	UL 60939-3	Passive filters for suppressing electromagnetic interference

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.

Dimension [mm]

Diagrams



	1) Line

Attenuation Loss

Standard version

	3 A

	6 A

	10 A

	12 A

	16 A

	20 A

	25 A

	32 A

Standard HP

	3 A

	6 A

	10 A

	12 A

	16 A

	20 A

	25 A

	32 A

Short Table of Variants FPAC RAIL Open complete table FPAC RAIL

Rated Current @ Ta 50°C [A] Rated current Max. rated current according to IEC vs. UL/CSA- approval for the listed type.	Filter Type Filter Type Filter classification according leakage current for easy reading: Standard: < 0.5 mA Medizinal: < 0.1 mA Leakage Current	Power Dissipation [W]	Order Number Variant Details The link on the respective order number refers to a separat tab with specific detailed information. This assures better readable information of the selected product. Change to the tab All Products in order to show details of another variant. This approach offers to use generic alias link to the product details: www.schurter.xx/art/ [Order Number] where the following variables are used: - xx is the country specific domain - [Order Number]	...

3	Standard version	0.29	3-150-001	...
6	Standard version	0.73	3-150-002	...
10	Standard version	1.31	3-150-003	...
12	Standard version	1.44	3-150-004	...
16	Standard version	1.97	3-150-005	...
20	Standard version	1.64	3-150-006	...
25	Standard version	2.5	3-150-007	...
32	Standard version	3.79	3-150-008	...
3	Standard version HP	0.29	3-150-011	...
6	Standard version HP	0.74	3-150-012	...
10	Standard version HP	1.39	3-150-013	...
12	Standard version HP	1.43	3-150-014	...
16	Standard version HP	1.97	3-150-015	...
20	Standard version HP	1.8	3-150-016	...
25	Standard version HP	2.56	3-150-017	...
32	Standard version HP	3.89	3-150-018	...
1) Leakage current according IEC 60939-1

Packaging unit

6 Pcs

Table of Variants FPAC RAIL

Rated Current @ Ta 50°C [A] Rated current Max. rated current according to IEC vs. UL/CSA- approval for the listed type.	Filter Type Filter Type Filter classification according leakage current for easy reading: Standard: < 0.5 mA Medizinal: < 0.1 mA Leakage Current	Power Dissipation [W]	Contact Resistance [mΩ]	Leakage Current [mA] @ 440V, 60Hz 1) Leakage Current The leakage current is an electric current flowing in an undesirable current path. In EMC filters this is done by the applied Y-capacitors, which are used for noise suppression. Information on the amount and classification of leakage currents are explained in detail and are listed in the data sheets. Leakage Current	Order Number Variant Details The link on the respective order number refers to a separat tab with specific detailed information. This assures better readable information of the selected product. Change to the tab All Products in order to show details of another variant. This approach offers to use generic alias link to the product details: www.schurter.xx/art/ [Order Number] where the following variables are used: - xx is the country specific domain - [Order Number]	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

3	Standard version	0.29	31.7	1.31	3-150-001	6
6	Standard version	0.73	20.2	1.31	3-150-002	6
10	Standard version	1.31	13.1	1.31	3-150-003	6
12	Standard version	1.44	10	1.31	3-150-004	6
16	Standard version	1.97	7.7	1.31	3-150-005	6
20	Standard version	1.64	4.1	1.31	3-150-006	6
25	Standard version	2.5	4	1.31	3-150-007	6
32	Standard version	3.79	3.7	1.31	3-150-008	6
3	Standard version HP	0.29	32.3	1.31	3-150-011	6
6	Standard version HP	0.74	20.6	1.31	3-150-012	6
10	Standard version HP	1.39	13.9	1.31	3-150-013	6
12	Standard version HP	1.43	9.9	1.31	3-150-014	6
16	Standard version HP	1.97	7.7	1.31	3-150-015	6
20	Standard version HP	1.8	4.5	1.31	3-150-016	6
25	Standard version HP	2.56	4.1	1.31	3-150-017	6
32	Standard version HP	3.89	3.7	1.31	3-150-018	6
1) Leakage current according IEC 60939-1