6100-3 with sealing kit IP54 to appliance
(without locking brackets)

IEC connector C14
Screw-on mounting
Solder/quick connect terminals

6100-3 with sealing kit IP54
(including locking brackets)

Series: 6100-3

IEC Appliance Inlet C14, Screw-on Mounting, Front or Rear Side, Solder or Quick-connect Terminal

12 Variants

Connectors (Inlets/Outlets)

C14

70° C

Green Line

Approvals and Compliances

CAD

Description

Panel mount: Screw-on mounting front / rear-side
Appliance Inlet, Pin temperature 70 °C, Protection class I
Variants with factory mounted inlet gasket and sealing kit for IP54 into the equipement and the pluggable power supply
Solder / Quick Connect

Unique Selling Proposition

Variants made from plant-based plastics with 2.75 kg CO2 reduction per packaging unit
The plant-based plastics meet the increased glow wire test requirements according to IEC 60695-2-12 and -13
For use in unattended household appliances according to IEC 60335-1

Other versions on request

Types for rivet mounting available upon request

Detailed request for product

Details 6100-3

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

15 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 2 kVAC between L-N
> 2 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 / IP54 with sealing kit acc. to IEC 60529

Protection against electric shock

IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Solder / Quick Connect

Panel Thickness S

See details in drawing
Snapper

Screw: max 8 mm, max 3 mm with sealing kit
Mounting screw torque max 0.5 Nm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 6100

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40015595
UL Approvals	UL	UR File Number: E96454
CCC Approvals	CCC	CCC Certificate Number: 2020180204014680

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements
	Suitable for applications acc.	IEC 60335-1	Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
White Paper Glow wire test	SCHURTER AG	Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.
Green Line	SCHURTER AG	Green Line products are aligned with the UN's Strategic Development Goals (SDGs). Components of the products are made of sustainable, environmentally friendly materials. These include, for example, bio-based plastics or lead-free metal alloys. Products in this line can also support the economical, intelligent use of resources.

Dimensions [mm]



	E: Solder terminals 20.5 mm E: Quick connect terminals 23.5 mm



	1) mounting from front-side 2) mounting from rear-side

Assembly Instructions

	6100-3 incl. sealing kit for IP54

	Panel thickness max. 3 mm Tightening torque max. 0.1 Nm 1) Device plug 6100-3 with factory-fitted insertion seal 2) Flat gasket 3) Housing 4) Support bolt 5) Sealing ring 6) Spring washer 7) Nut 8) Locking bracket

	Mating cordsets to sealing kit

Short Table of Variants 6100-3 Open complete table 6100-3

	Panel mounting	Sealing kit	Order Number	...

•	Screw	-	3-144-634	...
	Screw	-	6100.3200	...
	Screw	with locking bracket	6100.3200.33	...
	Screw	without locking bracket	6100.3200.32	...
•	Screw	-	3-144-632	...
	Screw	-	6100.3300	...
	Screw	with locking bracket	6100.3300.33	...
	Screw	without locking bracket	6100.3300.32	...
•	Screw	-	3-144-633	...
	Screw	-	6100.3100	...
	Screw	with locking bracket	6100.3100.33	...
	Screw	without locking bracket	6100.3100.32	...
The variants IP54 (6100.xxxx.33) include the inlet with factory mounted inlet gasket and the kit for IP protection to the equipment and for the power connector incl. a cord retaining for a specific cord connector. Samples can be ordered with suffix ".H" (e.g. 6100.3100.33.H). Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered on request. They are suitable for the use in unattended household equipment acc. IEC 60335-1.

Packaging unit

50 Pcs

Table of Variants 6100-3

	Panel mounting	Sealing kit	Terminal	IP Protection Class Front Side	Protection Class	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

•	Screw	-	Quick connect terminals 4.8 x 0.8 mm	IP40	I	3-144-634	50
	Screw	-	Quick connect terminals 4.8 x 0.8 mm	IP40	I	6100.3200	50
	Screw	with locking bracket	Quick connect terminals 4.8 x 0.8 mm	IP54	I	6100.3200.33	50
	Screw	without locking bracket	Quick connect terminals 4.8 x 0.8 mm	IP54	I	6100.3200.32	50
•	Screw	-	Quick connect terminals 6.3 x 0.8 mm	IP40	I	3-144-632	50
	Screw	-	Quick connect terminals 6.3 x 0.8 mm	IP40	I	6100.3300	50
	Screw	with locking bracket	Quick connect terminals 6.3 x 0.8 mm	IP54	I	6100.3300.33	50
	Screw	without locking bracket	Quick connect terminals 6.3 x 0.8 mm	IP54	I	6100.3300.32	50
•	Screw	-	Solder terminals 3.5 x 0.8 mm	IP40	I	3-144-633	50
	Screw	-	Solder terminals 3.5 x 0.8 mm	IP40	I	6100.3100	50
	Screw	with locking bracket	Solder terminals 3.5 x 0.8 mm	IP54	I	6100.3100.33	50
	Screw	without locking bracket	Solder terminals 3.5 x 0.8 mm	IP54	I	6100.3100.32	50
The variants IP54 (6100.xxxx.33) include the inlet with factory mounted inlet gasket and the kit for IP protection to the equipment and for the power connector incl. a cord retaining for a specific cord connector. Samples can be ordered with suffix ".H" (e.g. 6100.3100.33.H). Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered on request. They are suitable for the use in unattended household equipment acc. IEC 60335-1.

Packaging unit

50 Pcs

References / Document Downloads

References 6100-3

Alternative: protection class II version (1)

[Swipe to the left and right for more options]

6102-3

Alternative: version with line filter (2)

[Swipe to the left and right for more options]

5110

5120

Mating Components 6100-3

Mating Outlets/Connectors (7)

[Swipe to the left and right for more options]

4787

4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I

5091

IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

Accessories 6100-3

Accessories (3)

[Swipe to the left and right for more options]

Wire Harness

Wire harness for SCHURTER products

RC320

Rear Cover for Power Entry Module

Cord retaining kits

Cord retaining strain relief

26.09.2024

Transformation_Date:	2024-09-26 16:46:37
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG07_Export/2024_09_26/09_34_53_912_552419/PGRSplits/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Connectors (Inlets/Outlets)
Typ_Name:	6100-3
Typ_AliasNames:	:6100-3:
Typ_ID:	394
Typ_Hierarchie:	020070020000002028
Typ_EPIM_Order:	320
Typ_Titel:	IEC Appliance Inlet C14, Screw-on Mounting, Front or Rear Side, Solder or Quick-connect Terminal
PublPrgr_Name:	Connector (Inlet/Outlet)
PublPrgr_Shortcut:	PG07
Variant table:	Variantentabelle_6100-3 (251098)

Series: 6100-3

Description 6100-3

Description

Unique Selling Proposition

Other versions on request

Details 6100-3

Approvals

Product standards

Application standards

Compliances

Dimensions [mm]

Assembly Instructions

Short Table of Variants 6100-3 Open complete table 6100-3

References / Document Downloads

References 6100-3

Alternative: protection class II version (1)

Alternative: version with line filter (2)

Mating Components 6100-3

Mating Outlets/Connectors (7)

Accessories 6100-3

Accessories (3)