Snap-in version
from front side
Solder/quick connect terminals

Screw-on mounting
from front side
Solder/quick connect terminals

Series: 4797

IEC Appliance Outlet J, Snap-in/Screw-on Mounting, Front Side, Solder or Quick-connect Terminal

14 Variants

Connectors (Inlets/Outlets)

type J

70° C

Approvals and Compliances

CAD

Power Distribution Units

Description

Snap-in or screw-on mounting, front side:
Connector, Pin temperature 70 °C Protection class I
V-Lock, P-Lock and Twylock compatible
Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.
Solder / Quick Connect

Characteristics

Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

Other panel thickness
Variants in white color
For protection class II

Detailed request for product

The integration of light pipes in the appliance outlet provides status indication in smart PDUs. See PDU Landing Page for more information. Power Distribution Units

Details 4797

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

16 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

20 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

Protection against electric shock

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

Suitable for appliances with protection class I or II acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Solder / Quick Connect

Panel Thickness S

See details in drawing
Snapper

Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 0.8 mm to 3 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

type J acc. to IEC 60320-3
UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 4797

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40040106
UL Approvals	UL	UR File Number: E103791
CCC Approvals	CCC	CCC Certificate Number: 2019180204008810, 2019180204011408

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60320-3	Appliance couplers for household and similar general purposes
Designed according to	UL 498	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 42	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements
	Suitable for applications acc.	IEC 60335-1	Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
White Paper Glow wire test	SCHURTER AG	Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.

Dimensions [mm]

	Snap-in mounting from front side

	Screw-on from front side

Short Table of Variants 4797 Open complete table 4797

Panel mounting	Panel Thickness s [mm]	Terminal	Order Number	...

Snap-in	1	Quick connect terminals 6.3 x 0.8 mm	4797.0010	...
Snap-in	1.2	Quick connect terminals 6.3 x 0.8 mm	4797.0012	...
Snap-in	1.5	Quick connect terminals 6.3 x 0.8 mm	4797.0015	...
Snap-in	2	Quick connect terminals 6.3 x 0.8 mm	4797.0020	...
Snap-in	2.5	Quick connect terminals 6.3 x 0.8 mm	4797.0025	...
Snap-in	3	Quick connect terminals 6.3 x 0.8 mm	4797.0030	...
Snap-in	1	Solder terminals	4797.3010	...
Snap-in	1.2	Solder terminals	4797.3012	...
Snap-in	1.5	Solder terminals	4797.3015	...
Snap-in	2	Solder terminals	4797.3020	...
Snap-in	2.5	Solder terminals	4797.3025	...
Snap-in	3	Solder terminals	4797.3030	...
Screw	-	Quick connect terminals 6.3 x 0.8 mm	4797.0000	...
Screw	-	Solder terminals	4797.3000	...

Packaging unit

50 Pcs

Table of Variants 4797

Panel mounting	Panel Thickness s [mm]	Terminal	Protection Class	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

Snap-in	1	Quick connect terminals 6.3 x 0.8 mm	I	4797.0010	50
Snap-in	1.2	Quick connect terminals 6.3 x 0.8 mm	I	4797.0012	50
Snap-in	1.5	Quick connect terminals 6.3 x 0.8 mm	I	4797.0015	50
Snap-in	2	Quick connect terminals 6.3 x 0.8 mm	I	4797.0020	50
Snap-in	2.5	Quick connect terminals 6.3 x 0.8 mm	I	4797.0025	50
Snap-in	3	Quick connect terminals 6.3 x 0.8 mm	I	4797.0030	50
Snap-in	1	Solder terminals	I	4797.3010	50
Snap-in	1.2	Solder terminals	I	4797.3012	50
Snap-in	1.5	Solder terminals	I	4797.3015	50
Snap-in	2	Solder terminals	I	4797.3020	50
Snap-in	2.5	Solder terminals	I	4797.3025	50
Snap-in	3	Solder terminals	I	4797.3030	50
Screw	-	Quick connect terminals 6.3 x 0.8 mm	I	4797.0000	50
Screw	-	Solder terminals	I	4797.3000	50

Packaging unit

50 Pcs

References / Document Downloads

References 4797

Substitute for type (3)

[Swipe to the left and right for more options]

0723

5213

5216

Alternative: version with integrated light pipes (1)

[Swipe to the left and right for more options]

4797-5

Mating Components 4797

Mating Inlets/Plugs (2)

[Swipe to the left and right for more options]

4796

4796, Mounting: Power Cord, Cable, Plug: IEC I

4789

4789, Mounting: Power Cord, Screw, Plug: IEC I

Mating Inlets/Plugs shuttered (4)

[Swipe to the left and right for more options]

3-100-362

VAC19KS, Interconnection, V-Lock cord retaining, 2.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black

3-100-363

VAC19KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black

6051.2147

VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black

6051.2197

VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black

Accessories 4797

Accessories (3)

[Swipe to the left and right for more options]

Wire Harness

Wire harness for SCHURTER products

RC320

Rear Cover for Power Entry Module

Cord retaining kits

Cord retaining strain relief

26.09.2024

Transformation_Date:	2024-09-26 17:51:18
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG07_Export/2024_09_26/09_34_53_912_552419/PGRSplits/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Connectors (Inlets/Outlets)
Typ_Name:	4797
Typ_AliasNames:	:4797:
Typ_ID:	425
Typ_Hierarchie:	020070130000002297
Typ_EPIM_Order:	770
Typ_Titel:	IEC Appliance Outlet J, Snap-in/Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
PublPrgr_Name:	Connector (Inlet/Outlet)
PublPrgr_Shortcut:	PG07
Variant table:	Variantentabelle V69 (44257)

Series: 4797

Description 4797

Description

Characteristics

Other versions on request

Details 4797

Approvals

Product standards

Application standards

Compliances

Dimensions [mm]

Short Table of Variants 4797 Open complete table 4797

References / Document Downloads

References 4797

Substitute for type (3)

Alternative: version with integrated light pipes (1)

Mating Components 4797

Mating Inlets/Plugs (2)

Mating Inlets/Plugs shuttered (4)

Accessories 4797

Accessories (3)