4710
cross
Snap-in mounting from front side

4710
along
Snap-in mounting from front side

4710
cross, view from rear side
Snap-in mounting from front side

4710
cross
With integrated Light Pipes

4710 IEC Appliance Outlet J, Snap-in Mounting, Front Side, IDC Terminal

10A outlet on PCB with Light Pipes

Series: 4710

IEC Appliance Outlet J, Snap-in Mounting, Front Side, IDC Terminal

20 Variants

Connectors (Inlets/Outlets)

type J

70° C

Approvals and Compliances

CAD

Video

Description

Panel mount: Snap-in version, front side
Connector, Pin temperature 70 °C, Protection class I
Wire gauge 10AWG/6.0mm², 12AWG/4.0mm², 2.5mm²
IDC terminals acc. to IEC 60998-2-3 for solid wires

Unique Selling Proposition

Reduces labor costs
Allows wiring of multiple terminals at once
Cross and along orientation
V-Lock cord retaining standard

Characteristics

Protection cover can be used as wire press
Live contact available as IDC, solder or quick connect terminal
ready to use with V-Lock cordsets
Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

Other panel thickness

Detailed request for product

The integration of light pipes in the appliance outlet provides status indication in smart PDUs. See PDU Landing Page for more information. Power Distribution Units

Details 4710

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

16 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

20 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 2.5 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

Protection against electric shock

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

IDC terminals

Panel Thickness S

See details in drawing
Snapper

1/1.2/1.5/2/2.5/3 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

type J acc. to IEC 60320-3
UL 60320-1, CSA C22.2 no. 60320-1 ,   Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 4710

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40042639
UL Approvals	UL	UR File Number: E103791
CCC Approvals	CCC	CCC Certificate Number: 2014010204668919

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60320-3	Appliance couplers for household and similar general purposes
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
Halogen Free	SCHURTER AG	SCHURTER strives to offer our customers halogen free products.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Dimensions [mm]

	Version „cross“ (wires cross to pin axis) L/N/PE: IDC terminals

	Version „along“ (wires along to pin axis) L/N/PE: IDC terminals

	Version „cross“ (wires cross to pin axis) N/PE: IDC terminals, L: quick connect or solder terminal

	E: Quick connect terminal 6.3x0.8:␉46.7 mm E: Solder terminal:␉␉47.2 mm

	Version „along“ (wires along to pin axis) N/PE: IDC terminals, L: quick connect or solder terminal

	E: Quick connect terminal 6.3x0.8:␉46.7 mm E: Solder terminal:␉␉47.2 mm

Assembly Instructions

	Wire press version "cross"

	Wire press version "along"

Short Table of Variants 4710 Open complete table 4710

Alignment 1)	Conductor cross section	Panel Thickness s [mm]	Order Number	...

along	2.5 mm²	1.5	4710.6014	...
along	2.5 mm²	1.5	4710.6254	...
along	2.5 mm²	1.5	4710.6154	...
along	4.0 mm² / 12 AWG	1	4710.4012	...
along	4.0 mm² / 12 AWG	1.5	4710.4014	...
along	4.0 mm² / 12 AWG	1.5	4710.4254	...
along	4.0 mm² / 12 AWG	1.5	4710.4154	...
along	6.0 mm² / 10 AWG	1.5	4710.2014	...
along	6.0 mm² / 10 AWG	1.5	4710.2254	...
along	6.0 mm² / 10 AWG	1.5	4710.2154	...
cross	2.5 mm²	1.5	4710.5014	...
cross	2.5 mm²	1.5	4710.5254	...
cross	2.5 mm²	1.5	4710.5154	...
cross	4.0 mm² / 12 AWG	1.5	4710.3014	...
cross	4.0 mm² / 12 AWG	2	4710.3015	...
cross	4.0 mm² / 12 AWG	1.5	4710.3254	...
cross	4.0 mm² / 12 AWG	1.5	4710.3154	...
cross	6.0 mm² / 10 AWG	1.5	4710.1014	...
cross	6.0 mm² / 10 AWG	1.5	4710.1254	...
cross	6.0 mm² / 10 AWG	1.5	4710.1154	...
Articles with 2.5 mm² only with ENEC approval. Outer diameter of wire (including insulation) max. 4.5 mm. 1) The alignment describes whether the wires are along or across to the connector pin axis.

Packaging unit

50 Pcs

Table of Variants 4710

Alignment 1)	Conductor cross section	Panel Thickness s [mm]	Terminal type live contact	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

along	2.5 mm²	1.5	IDC terminal	4710.6014	50
along	2.5 mm²	1.5	Quick connect terminal 6.3 x 0.8 mm	4710.6254	50
along	2.5 mm²	1.5	Solder terminal	4710.6154	50
along	4.0 mm² / 12 AWG	1	IDC terminal	4710.4012	50
along	4.0 mm² / 12 AWG	1.5	IDC terminal	4710.4014	50
along	4.0 mm² / 12 AWG	1.5	Quick connect terminal 6.3 x 0.8 mm	4710.4254	50
along	4.0 mm² / 12 AWG	1.5	Solder terminal	4710.4154	50
along	6.0 mm² / 10 AWG	1.5	IDC terminal	4710.2014	50
along	6.0 mm² / 10 AWG	1.5	Quick connect terminal 6.3 x 0.8 mm	4710.2254	50
along	6.0 mm² / 10 AWG	1.5	Solder terminal	4710.2154	50
cross	2.5 mm²	1.5	IDC terminal	4710.5014	50
cross	2.5 mm²	1.5	Quick connect terminal 6.3 x 0.8 mm	4710.5254	50
cross	2.5 mm²	1.5	Solder terminal	4710.5154	50
cross	4.0 mm² / 12 AWG	1.5	IDC terminal	4710.3014	50
cross	4.0 mm² / 12 AWG	2	IDC terminal	4710.3015	50
cross	4.0 mm² / 12 AWG	1.5	Quick connect terminal 6.3 x 0.8 mm	4710.3254	50
cross	4.0 mm² / 12 AWG	1.5	Solder terminal	4710.3154	50
cross	6.0 mm² / 10 AWG	1.5	IDC terminal	4710.1014	50
cross	6.0 mm² / 10 AWG	1.5	Quick connect terminal 6.3 x 0.8 mm	4710.1254	50
cross	6.0 mm² / 10 AWG	1.5	solder terminal	4710.1154	50
Articles with 2.5 mm² only with ENEC approval. Outer diameter of wire (including insulation) max. 4.5 mm. 1) The alignment describes whether the wires are along or across to the connector pin axis.

Packaging unit

50 Pcs

References / Document Downloads

References 4710

Alternative: version for 10 A (15 A) (2)

[Swipe to the left and right for more options]

4710-5

6610

Mating Components 4710

Mating Inlets/Plugs (2)

[Swipe to the left and right for more options]

4796

4796, Mounting: Power Cord, Cable, Plug: IEC I

4789

4789, Mounting: Power Cord, Screw, Plug: IEC I

Mating Inlets/Plugs shuttered (4)

[Swipe to the left and right for more options]

3-100-362

VAC19KS, Interconnection, V-Lock cord retaining, 2.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black

3-100-363

VAC19KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black

6051.2147

VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black

6051.2197

VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black

26.09.2024

Transformation_Date:	2024-09-26 17:48:22
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG07_Export/2024_09_26/09_34_53_912_552419/PGRSplits/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Connectors (Inlets/Outlets)
Typ_Name:	4710
Typ_AliasNames:	:4710:
Typ_ID:	86407
Typ_Hierarchie:	020070130000002470
Typ_EPIM_Order:	50
Typ_Titel:	IEC Appliance Outlet J, Snap-in Mounting, Front Side, IDC Terminal
PublPrgr_Name:	Connector (Inlet/Outlet)
PublPrgr_Shortcut:	PG07
Variant table:	Variantentabelle V87 (81199)

Series: 4710

Description 4710

Description

Unique Selling Proposition

Characteristics

Other versions on request

Details 4710

Approvals

Product standards

Application standards

Compliances

Dimensions [mm]

Assembly Instructions

Short Table of Variants 4710 Open complete table 4710

References / Document Downloads

References 4710

Alternative: version for 10 A (15 A) (2)

Mating Components 4710

Mating Inlets/Plugs (2)

Mating Inlets/Plugs shuttered (4)